Water Feature Maintenance

Precision Cleaning Leads to a Water Feature That Flourishes Through Spring, Summer and Fall

A property’s water feature has been hidden away for the winter. The spring is in full swing now, and the residents want to bring the yard back to life. Simply switching the pump back on isn’t the best plan for a pond that has been out of commission over the colder months. Take some time out of the daily schedule to service the pond. Preparing the water and organisms allows the miniature ecosystem to thrive through the months.

Remove the Water

After any long-term period, the pond will be improperly balanced and possibly full of debris. Start out by removing the water entirely. Use a pump, hose and child’s pool as the main tools. It’s ideal to keep most of the water so that it’s not wasted as runoff into the local sewers.

Allow the pump to remove most of the water from the pond and into the child’s pool. If there are any fish in the water, transfer them into the pool by using a net when the water is relatively low. They’re simply easier to catch in shallow waters.

Give the Surfaces a Spring Cleaning

The feature’s interior surfaces are now exposed. Any Boulder landscape contractor would suggest that a thorough cleaning is necessary at this point. The pond walls won’t be visible again until next season. Use a pressure washer or long, scrubbing brush to clean off the feature. Rocks and the smooth, pond base should be the focus. Algae and other materials grow quickly over the winter months.

Avoid the use of any cleaning products. Stick to water alone. Leave some algae to thrive in the feature too. A natural environment isn’t always squeaky clean.

Fix Those Damages

Pond maintenance also involves minor repairs. Pump the rinsing water from the feature as necessary. Take a close look at the pond’s liner. Perform any repairs that are necessary to avoid leaks. Water loss from the pond is costly to both the household finances and surrounding environment.

If residents notice repairs that are beyond their skill levels, contacting a Louisville landscape contractor might be necessary. A professional look at the pond will ward off any serious issues that might arise in the future.

Clear out the Filters

Depending on the size of the pond, there might be more than one filter. Pull each filter out, and take a look at them. Remove any debris from them. Some features have a biological filter. Treat these types with care so that the biomaterials remain in place. They only require minimal, pond maintenance practices by removing the large debris from their surfaces.

Examine Pumps and Other Mechanical Parts

Every Boulder landscape contractor will stress that pump care is one of the most important aspects of spring cleaning in a pond. Don’t activate any pumps until each one has a thorough inspection. Look for debris, loose parts or broken housings. The pump performs the hard work of moving the water in a healthy manner. Without these critical components, the water loses its balance and organisms suffer from the poor conditions.

Update Parts

While the water remains drained from the pond, residents should seriously consider a checkup on every exposed part. Look for loose fasteners, cracked areas and other important details. This time period is the best scenario for a repair. Whether residents perform the work themselves or hire a professional, there’s no additional effort of draining the water at another time. This scenario only disturbs the water’s balance once again. Repair or adjust every necessary part before adding the water back to the feature.

Detoxify the Water

Pump the water back into the feature. Add fresh water to fill it all the way to the maximum height. It’s important to verify the water’s chemistry at this point. Measurement devices, especially for pH values, are required to create a comfortable environment for both the fish and plants.

Examine the chemical makeup of the water. Use the appropriate detoxifier in order to reach the goal values. This process can take some time, but it’s worth the effort for a healthy pond.

Check Water Temperatures

Activate the pond’s pumps and aerators. Watch the mechanical aspect of the feature for a few minutes. If any hiccups or loud noises emanate from the components, shut them down and ascertain the situation. The feature should work with a low hum as the water moves through its necessary pathways.

Consider another checkup of the water’s chemistry as it moves through the pumping system. Ideally, the water should be normalized across its entire volume.

Add Beneficial Bacteria

Every pond has a certain level of algae in its water. These microorganisms are naturally occurring, but residents must fight off large populations. Algae alters the water’s chemistry, which leads to fish and plant problems. To combat algae growth, add in beneficial bacteria.

Bacteria work against algae while complementing the water in other ways. Avoid chemicals that simply break down the algae. They don’t help the water in any way. Beneficial bacteria are the heart of a healthy pond.

Introduce Fish and Plant Life

With balanced water in the pond, introduce the fish back into the feature. Slowly add the plants along the edges. Add floating plants over the next few weeks, such as lotuses, to really enhance the feature. Continue to monitor and add beneficial bacteria as needed. The fish and plants will actually help the water’s balance over time. Manually altering it will only be necessary a few times during the spring and summer.

When local residents are in need of a Louisville landscape contractor, look to the services of Don King’s Landscaping. This expert team can offer suggestions or full-service appointments to get a water feature running for the long term. Taking pride in the landscaping improves a household’s quality of life and property value at the same time.

Contact Us :



Verification Image

Enter number from above: