How to build a Retaining WallHomeowners are always on the lookout for the next, best update to the backyard. Aside from planting gardens and keeping up the lawn, residents might consider a hardscape option. A retaining or sitting wall can be installed in almost any location. Surround a fire pit or line the property’s perimeter with the restraining wall. Explore the details behind wall construction so that this feature can be prominently displayed in any backyard.

Why Should Residents Build a Retaining Wall?

The obvious reason why a retaining wall is a solid, investment choice is property value. A backyard looks tidy and well-kept, which adds value when a property is up for sale. Other benefits include functional aspects when the stonework is professionally installed.

These retaining walls actually refine the land around a structure. Curbing erosion and controlling drainage are the two, functional benefits of retaining walls. Natural rainwater moves around these walls, which protects the home from potential flooding.

Planning Out the Installation

Start an installation by planning out the location. Clear away any plants or other obstacles along the wall’s presumed pathway. Use the stones to calculate the length and width of the sitting wall. Residents will need to clear away an area that includes the stone’s width plus one inch on either side. This extra space gives residents an area to back fill the wall during the installation.

Act like a professional stoneworker and mark the ends of the retaining wall. The markers can be wood stakes or stones set down as placeholders.

Keeping up With Level

When professional masonry services builds a retaining wall, level is their main concern throughout the project. A wall with even a slight tilt will topple in time. Tie a string with an attached, line level between the stakes. Pay close attention to the level bubble as adjustments are made to the string. This level must be matched across the entire project as the residents add in the wall base and stones.

Creating the Trench

A Broomfield retaining wall builder would suggest that a six-inch-deep trench is necessary to start the retaining wall’s construction. Follow the trench’s width that was determined during the layout. Remove the soil with a spade so that the topsoil isn’t in place anymore.

Use a measuring line to match the six-inch depth to the level line strung above the work space. Check and recheck the digging depth. Avoiding level issues is critical at this juncture.

Applying the Base Layer

The stones cannot be placed into the trench without a paver base. Carefully layer this rock-and-dust substance into the trench. A professional mason will check the level and tamp the material down as the layers add up in volume. Ideally, about three inches of paver base should line the entire trench.

Tamping it Down

Tamping down the paver base with just a gardening spade isn’t good enough for a retaining or sitting wall. Air pockets within the base will create issues over time.

Borrow or rent a hand tamper from a Superior retaining wall builder or rental company. These simple tools give your arms the force that they need to perfectly tamp the base down. Check the trench’s level during this process. Cutting and filling the trench with more material may be necessary.

Starting the First Course

Pick one end of the trench to start the first course. Place the stone in the center of the trench’s width. At this point, about half of the stone should be below ground level.

Pull out a four-foot level. Verify the stone’s level from several angles. Carefully tap the stone into the base by using a rubber mallet. Recheck the level. Repeat these steps until the stones cover the entire length of the trench.

Securing the First Course

With the first course in place, secure it even further with extra fill from the paver-base materials. Fill in the gaps along the stones’ edges. Professional landscaping services would suggest the addition of some soil too.

This filling process secures the stones to the paver base. They should barely move when a hand tries to dislodge them now. The base and fill are performing structural wonders on the first course.

Beginning the Second Course

No sturdy retaining wall can have stones that are lined up in perfect, vertical lines. They must be offset from each other in order to create a stable structure. Start the second course with a stone cut perfectly in half. This strategy allows the second course to be staggered from the one below it. Subsequently, the third course will have an appearance like the first course. The staggered effect should rise up until the residents tap in the capstones.

Gluing it Down

Every course above the first layer must be glued in. Select a glue that’s complementary to the material, such as stone adhesive or caulk. As the stones drop into place, they’ll be permanently attached. There’s a bit of room for adjustments, but consider the wall as a permanent structure from the moment that the glue and stone make contact.

Hiring Retaining Wall Experts

A sitting wall may be too complicated for some residents. There’s always an option with a local, Superior retaining wall builder. Don King Landscaping is pleased to offer their expertise and training to the local community. They’re pleased to visit a property, quote the work and start the project.

Any challenging factors, such as hillside installations, become part of the quoted price. Residents end up with quality stonework that lasts for decades at a time.

Planning every step of a retaining wall’s installation is crucial to success. Working with a Broomfield stoneworker is an affordable way to finish up this project without too much effort on the residents’ parts. It may take only a few days for the project to come alive and thrill the homeowners.

Contact Us :



Verification Image

Enter number from above: